Ordering no:
Cable plug connector, black, injected onto cable
Cable plug connector, black, injected onto cable, Series 720
Available numbers of contacts
79 9149 020 03
Snap-In IP67 cable connector, Contacts: 3, 2,5 - 4,0 mm, not shielded, moulded on cable, IP67, Standard cable, PUR black, 3 x 0,75 mm²
Snap In, series 720, Miniature connectors
| Order number |
79 9149 020 03
|
| Connector locking system | snap |
| Termination | moulded on cable |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Cable outlet | 2,5 - 4,0 mm |
| Cable length | 2 m |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 70 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 7 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA (UL 94 V-0) |
| Housing material | PUR |
| Cable data | |
| Sheath material | PUR |
| Single-lead insulation | PVC |
| Single-lead structure | 24 x 0,2 |
| Conductor resistance | 28Ω/Km (20°C) |
| Temperature range, moving cable, °C from | -5 |
| Temperature range, moving cable, °C to | 70 |
| Temperature range, fixed cable, °C from | -25 |
| Temperature range, fixed cable, °C to | 70 |
| Bending radius, fixed cable | min. 40 mm |
| Bending radius, moving cable | min. 70 mm |
| Customs tariff number | 85444290 |
| Weight (g) | 149 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
79 9157 020 05
Snap-In IP67 cable connector, Contacts: 5, 2,5 - 4,0 mm, not shielded, moulded on cable, IP67, Standard cable, PUR black, 5 x 0,75 mm²
Snap In, series 720, Miniature connectors
| Order number |
79 9157 020 05
|
| Connector locking system | snap |
| Termination | moulded on cable |
| Wire gauge (mm) | 0,75 mm² |
| Wire gauge (AWG) | 20 |
| Cable outlet | 2,5 - 4,0 mm |
| Cable length | 2 m |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 70 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 5 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA (UL 94 V-0) |
| Housing material | PUR |
| Cable data | |
| Sheath material | PUR |
| Single-lead insulation | PVC |
| Single-lead structure | 24 x 0,2 |
| Conductor resistance | 28Ω/Km (20°C) |
| Temperature range, moving cable, °C from | -5 |
| Temperature range, moving cable, °C to | 70 |
| Temperature range, fixed cable, °C from | -25 |
| Temperature range, fixed cable, °C to | 70 |
| Bending radius, fixed cable | min. 50 mm |
| Bending radius, moving cable | min. 90 mm |
| Customs tariff number | 85444290 |
| Weight (g) | 221 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
79 9169 020 08
Snap-In IP67 cable connector, Contacts: 8, 2,5 - 4,0 mm, not shielded, moulded on cable, IP67, Standard cable, PUR black, 8 x 0,25 mm²
Snap In, series 720, Miniature connectors
| Order number |
79 9169 020 08
|
| Connector locking system | snap |
| Termination | moulded on cable |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Cable outlet | 2,5 - 4,0 mm |
| Cable length | 2 m |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 70 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 2 A |
| Rated voltage | 125 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA (UL 94 V-0) |
| Housing material | PUR |
| Cable data | |
| Sheath material | PUR |
| Single-lead insulation | PVC |
| Single-lead structure | 32 x 0,1 |
| Cable diameter | 5.7 |
| Conductor resistance | 79,9Ω/Km (20°C) |
| Temperature range, moving cable, °C from | -5 |
| Temperature range, moving cable, °C to | 70 |
| Temperature range, fixed cable, °C from | -25 |
| Temperature range, fixed cable, °C to | 70 |
| Bending radius, fixed cable | min. 5 x D |
| Bending radius, moving cable | min. 12 x D |
| Customs tariff number | 85444290 |
| Weight (g) | 110 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
79 9177 020 12
Snap-In IP67 cable connector, Contacts: 12, 2,5 - 4,0 mm, not shielded, moulded on cable, IP67, Standard cable, PUR black, 12 x 0,25 mm²
Snap In, series 720, Miniature connectors
| Order number |
79 9177 020 12
|
| Connector locking system | snap |
| Termination | moulded on cable |
| Wire gauge (mm) | 0,25 mm² |
| Wire gauge (AWG) | 24 |
| Cable outlet | 2,5 - 4,0 mm |
| Cable length | 2 m |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 70 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 2 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA (UL 94 V-0) |
| Housing material | PUR |
| Cable data | |
| Sheath material | PUR |
| Single-lead insulation | PP |
| Single-lead structure | 14 x 0,15 |
| Conductor resistance | 79Ω/Km (20°C) |
| Temperature range, moving cable, °C from | -25 |
| Temperature range, moving cable, °C to | 80 |
| Temperature range, fixed cable, °C from | -50 |
| Temperature range, fixed cable, °C to | 80 |
| Bending radius, fixed cable | min. 5 x D |
| Bending radius, moving cable | min. 10 x D |
| Customs tariff number | 85444290 |
| Weight (g) | 135 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?