Ordering no:
Male panel mount connector with single wires, fixing thread, M10 x 0.75
Male panel mount connector with single wires, fixing thread, M10 x 0.75, Series 768/718
Available numbers of contacts
76 6219 1111 00003-0200
M8 male panel mount connector, Contacts: 3, not shielded, single wires, IP67
M8, series 718, Automation technology - sensors and actuators
| Order number |
76 6219 1111 00003-0200
Alternative order number:
09 3419 00 03 |
| Notice |
Please note that, due to the change from the old to the new order number, there may be deviations in the technical specifications. For questions about product details, please use the ‘Contact Customer Service’ form on the right.
More
|
| Connector locking system | snap, screw |
| Termination | single wires |
| Wire gauge (mm) | 0.25 mm² |
| Wire gauge (AWG) | 24 |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 6.44 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
CAD files
76 6219 1111 00004-0200
M8 male panel mount connector, Contacts: 4, not shielded, single wires, IP67
M8, series 718, Automation technology - sensors and actuators
| Order number |
76 6219 1111 00004-0200
Alternative order number:
09 3421 00 04 |
| Notice |
Please note that, due to the change from the old to the new order number, there may be deviations in the technical specifications. For questions about product details, please use the ‘Contact Customer Service’ form on the right.
More
|
| Connector locking system | snap, screw |
| Termination | single wires |
| Wire gauge (mm) | 0.25 mm² |
| Wire gauge (AWG) | 24 |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 7.366 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
CAD files
76 6219 1111 00005-0200
M8 male panel mount connector, Contacts: 5, not shielded, single wires, IP67
M8, series 718, Automation technology - sensors and actuators
| Order number |
76 6219 1111 00005-0200
Alternative order number:
09 3425 00 05 |
| Notice |
Please note that, due to the change from the old to the new order number, there may be deviations in the technical specifications. For questions about product details, please use the ‘Contact Customer Service’ form on the right.
More
|
| Connector locking system | snap, screw |
| Termination | single wires |
| Wire gauge (mm) | 0.25 mm² |
| Wire gauge (AWG) | 24 |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 3 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85444290 |
| Weight (g) | 8 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
CAD files
76 6219 1111 00006-0200
M8 male panel mount connector, Contacts: 6, not shielded, single wires, IP67
M8, series 718, Automation technology - sensors and actuators
| Order number |
76 6219 1111 00006-0200
Alternative order number:
09 3423 00 06 |
| Notice |
Please note that, due to the change from the old to the new order number, there may be deviations in the technical specifications. For questions about product details, please use the ‘Contact Customer Service’ form on the right.
More
|
| Connector locking system | snap, screw |
| Termination | single wires |
| Wire gauge (mm) | 0.14 mm² |
| Wire gauge (AWG) | 26 |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 1,5 A |
| Rated voltage | 30 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 7.453 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
CAD files
76 6219 1111 00008-0200
M8 male panel mount connector, Contacts: 8, not shielded, single wires, IP67
M8, series 718, Automation technology - sensors and actuators
| Order number |
76 6219 1111 00008-0200
Alternative order number:
09 3427 00 08 |
| Notice |
Please note that, due to the change from the old to the new order number, there may be deviations in the technical specifications. For questions about product details, please use the ‘Contact Customer Service’ form on the right.
More
|
| Connector locking system | snap, screw |
| Termination | single wires |
| Wire gauge (mm) | 0.14 mm² |
| Wire gauge (AWG) | 26 |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 1,5 A |
| Rated voltage | 30 V |
| Rated impulse voltage | 800 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 9 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
CAD files
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?