Ordering no:
Female cable connector, IDT connection
Female cable connector, IDT connection, Series 768
Available numbers of contacts
99 3400 500 03
M8 female cable connector, Contacts: 3, 2.5 - 5.0 mm, not shielded, cutting clamp, IP67, UL
M8, series 768, Automation technology - sensors and actuators
| Order number |
99 3400 500 03
|
| Connector locking system | screw |
| Termination | cutting clamp |
| Wire gauge (mm) | 0.08 - 0.25 mm² |
| Wire gauge (AWG) | 28 - 24 |
| Cable outlet | 2.5 - 5.0 mm |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | – 25 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | III |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | TPU |
| Housing material | PA |
| Approval 1 | UL |
| Customs tariff number | 85366990 |
| Weight (g) | 4.527 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
99 3400 550 03
M8 female cable connector, Contacts: 3, 2.5 - 5.0 mm, not shielded, cutting clamp, IP67, UL
M8, series 768, Automation technology - sensors and actuators
| Order number |
99 3400 550 03
|
| Connector locking system | screw |
| Termination | cutting clamp |
| Wire gauge (mm) | 0.25 - 0.50 mm² |
| Wire gauge (AWG) | 24 - 20 |
| Cable outlet | 2.5 - 5.0 mm |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | – 25 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | III |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | TPU |
| Housing material | PA |
| Approval 1 | UL |
| Customs tariff number | 85366990 |
| Weight (g) | 4.56 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
99 3376 500 04
M8 female cable connector, Contacts: 4, 2.5 - 5.0 mm, not shielded, cutting clamp, IP67, UL
M8, series 768, Automation technology - sensors and actuators
| Order number |
99 3376 500 04
|
| Connector locking system | screw |
| Termination | cutting clamp |
| Wire gauge (mm) | 0.08 - 0.25 mm² |
| Wire gauge (AWG) | 28 - 24 |
| Cable outlet | 2.5 - 5.0 mm |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | – 25 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | III |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | TPU |
| Housing material | PA |
| Approval 1 | UL |
| Customs tariff number | 85366990 |
| Weight (g) | 4.637 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
99 3376 550 04
M8 female cable connector, Contacts: 4, 2.5 - 5.0 mm, not shielded, cutting clamp, IP67, UL
M8, series 768, Automation technology - sensors and actuators
| Order number |
99 3376 550 04
|
| Connector locking system | screw |
| Termination | cutting clamp |
| Wire gauge (mm) | 0.25 - 0.50 mm² |
| Wire gauge (AWG) | 24 - 20 |
| Cable outlet | 2.5 - 5.0 mm |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | – 25 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | III |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | TPU |
| Housing material | PA |
| Approval 1 | UL |
| Customs tariff number | 85366990 |
| Weight (g) | 4.65 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?