Ordering no:
Male panel mount connector with metal threaded sheath
Male panel mount connector with metal threaded sheath, Series 713/763
Available numbers of contacts
Variants for number of contacts 4
09 0431 212 04
M12-A male panel mount connector, Contacts: 4, not shielded, dip-solder, IP67
M18, series 713, Automation technology - sensors and actuators
| Order number |
09 0431 212 04
|
| Connector locking system | bolted |
| Termination | dip-solder |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 4 A (3 A UL) |
| Rated voltage | 250 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | >10⁸Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PA |
| Housing material | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 2.613 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?