Ordering no:
Double distributor, 1:1 wiring, male connector M12x1 - 2 female connectors M12x1
Double distributor, 1:1 wiring, male connector M12x1 - 2 female connectors M12x1, Series 765
Available numbers of contacts
79 5210 00 05
M12-A double distributor box, Contacts: 5, not shielded, pluggable, IP68, UL listed, en
M12, series 765, Automation technology - sensors and actuators
Order number |
79 5210 00 05
|
Connector locking system | bolted |
Termination | pluggable |
Degree of protection | IP68 |
Mechanical operation | > 100 Mating cycles |
Upper limit temperature | 85 °C |
Lower limit temperature | -25 °C |
Rated current (40 °C) | 4 A |
Rated voltage | 60 V |
Rated impulse voltage | 1500 V |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | II |
Volume resistivity | ≤ 3 mΩ |
Contact material | Pin: CuZn (brass), Socket: CuSn (bronze) |
Contact plating | Au (gold) |
Contact body material | PUR |
Housing material | PUR |
Approval 1 | UL listed |
Customs tariff number | 85369010 |
Weight (g) | 20 |




Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Downloads
Data sheet
Certificates
CAD files
79 5211 00 08
M12-A double distributor box, Contacts: 8, not shielded, pluggable, IP68, UL listed, en
M12, series 765, Automation technology - sensors and actuators
Order number |
79 5211 00 08
|
Connector locking system | bolted |
Termination | pluggable |
Degree of protection | IP68 |
Mechanical operation | > 100 Mating cycles |
Upper limit temperature | 85 °C |
Lower limit temperature | -25 °C |
Rated current (40 °C) | 2 A |
Rated voltage | 30 V |
Rated impulse voltage | 800 V |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | II |
Volume resistivity | ≤ 3 mΩ |
Contact material | Pin: CuZn (brass), Socket: CuSn (bronze) |
Contact plating | Au (gold) |
Contact body material | PUR |
Housing material | PUR |
Approval 1 | UL listed |
Customs tariff number | 85369010 |
Weight (g) | 25.801 |




Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Downloads
Data sheet
Certificates
CAD files
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?