Ordering no:
Cable plug connector M12x1 - Female cable connector, M8x1
Cable plug connector M12x1 - Female cable connector, M8x1, Series 765
Available numbers of contacts
79 5008 10 03
M12-A connecting cord, Contacts: 3, not shielded, moulded on cable, IP67, PUR black, 3 x 0,25 mm²
M12, series 765, Automation technology - sensors and actuators
Order number |
79 5008 10 03
|
Connector locking system | bolted |
Termination | moulded on cable |
Wire gauge (mm) | 0.25 mm² |
Wire gauge (AWG) | (24) |
Cable length | 1 m |
Degree of protection | IP67 |
Mechanical operation | > 100 Mating cycles |
Upper limit temperature | 85 °C |
Lower limit temperature | -25 °C |
Rated current (40 °C) | 4 A |
Rated voltage | 60 V |
Rated impulse voltage | 1500 V |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | II |
Volume resistivity | ≤ 3 mΩ |
Contact material | Pin: CuZn (brass), Socket: CuSn (bronze) |
Contact plating | Au (gold) |
Contact body material | PUR |
Housing material | PUR |
Cable data | |
Sheath material | PUR |
Single-lead insulation | PVC |
Single-lead structure | 32 x 0,1 |
Cable diameter | 4.5 |
Conductor resistance | 72Ω/Km |
Temperature range, moving cable, °C from | -25 |
Temperature range, moving cable, °C to | 80 |
Temperature range, fixed cable, °C from | -40 |
Temperature range, fixed cable, °C to | 80 |
Customs tariff number | 85444290 |
Weight (g) | 42 |



Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
79 5008 20 03
M12-A connecting cord, Contacts: 3, not shielded, moulded on cable, IP67, PUR black, 3 x 0,25 mm²
M12, series 765, Automation technology - sensors and actuators
Order number |
79 5008 20 03
|
Connector locking system | bolted |
Termination | moulded on cable |
Wire gauge (mm) | 0.25 mm² |
Wire gauge (AWG) | (24) |
Cable length | 2 m |
Degree of protection | IP67 |
Mechanical operation | > 100 Mating cycles |
Upper limit temperature | 85 °C |
Lower limit temperature | -25 °C |
Rated current (40 °C) | 4 A |
Rated voltage | 60 V |
Rated impulse voltage | 1500 V |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | II |
Volume resistivity | ≤ 3 mΩ |
Contact material | Pin: CuZn (brass), Socket: CuSn (bronze) |
Contact plating | Au (gold) |
Contact body material | PUR |
Housing material | PUR |
Cable data | |
Sheath material | PUR |
Single-lead insulation | PVC |
Single-lead structure | 32 x 0,1 |
Cable diameter | 4.5 |
Conductor resistance | 72Ω/Km |
Temperature range, moving cable, °C from | -25 |
Temperature range, moving cable, °C to | 80 |
Temperature range, fixed cable, °C from | -40 |
Temperature range, fixed cable, °C to | 80 |
Customs tariff number | 85444290 |
Weight (g) | 67 |



Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
79 5009 10 04
M12-A connecting cord, Contacts: 4, not shielded, moulded on cable, IP67, PUR black, 4 x 0,25 mm²
M12, series 765, Automation technology - sensors and actuators
Order number |
79 5009 10 04
|
Connector locking system | bolted |
Termination | moulded on cable |
Wire gauge (mm) | 0.25 mm² |
Wire gauge (AWG) | (24) |
Cable length | 1 m |
Degree of protection | IP67 |
Mechanical operation | > 100 Mating cycles |
Upper limit temperature | 85 °C |
Lower limit temperature | -25 °C |
Rated current (40 °C) | 4 A |
Rated voltage | 30 V |
Rated impulse voltage | 800 V |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | II |
Volume resistivity | ≤ 3 mΩ |
Contact material | Pin: CuZn (brass), Socket: CuSn (bronze) |
Contact plating | Au (gold) |
Contact body material | PUR |
Housing material | PUR |
Cable data | |
Sheath material | PUR |
Single-lead insulation | PVC |
Single-lead structure | 32 x 0,1 |
Cable diameter | 4.5 |
Conductor resistance | 80Ω/Km |
Temperature range, moving cable, °C from | -5 |
Temperature range, moving cable, °C to | 80 |
Temperature range, fixed cable, °C from | -25 |
Temperature range, fixed cable, °C to | 80 |
Customs tariff number | 85444290 |
Weight (g) | 42 |



Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
79 5009 20 04
M12-A connecting cord, Contacts: 4, not shielded, moulded on cable, IP67, PUR black, 4 x 0,25 mm²
M12, series 765, Automation technology - sensors and actuators
Order number |
79 5009 20 04
|
Connector locking system | bolted |
Termination | moulded on cable |
Wire gauge (mm) | 0.25 mm² |
Wire gauge (AWG) | (24) |
Cable length | 2 m |
Degree of protection | IP67 |
Mechanical operation | > 100 Mating cycles |
Upper limit temperature | 85 °C |
Lower limit temperature | -25 °C |
Rated current (40 °C) | 4 A |
Rated voltage | 30 V |
Rated impulse voltage | 800 V |
Pollution degree | 3 |
Overvoltage category | II |
Insulating material group | II |
Volume resistivity | ≤ 3 mΩ |
Contact material | Pin: CuZn (brass), Socket: CuSn (bronze) |
Contact plating | Au (gold) |
Contact body material | PUR |
Housing material | PUR |
Cable data | |
Sheath material | PUR |
Single-lead insulation | PVC |
Single-lead structure | 32 x 0,1 |
Cable diameter | 4.5 |
Conductor resistance | 80Ω/Km |
Temperature range, moving cable, °C from | -5 |
Temperature range, moving cable, °C to | 80 |
Temperature range, fixed cable, °C from | -25 |
Temperature range, fixed cable, °C to | 80 |
Customs tariff number | 85444290 |
Weight (g) | 70 |



Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?