Ordering no:
Female panel mount connector with single wires, S-Coding, plastic housing
Female panel mount connector with single wires, S-Coding, plastic housing, Series 814 S-coding
Available numbers of contacts
09 0692 300 04
M12-S female panel mount connector, Contacts: 3+PE, single wires, IP68, M16x1.5
M12, series 814, Automation technology - data transmission and power supply
| Order number |
09 0692 300 04
|
| Connector locking system | bolted |
| Termination | single wires |
| Wire gauge (mm) | 1.38 mm² |
| Wire gauge (AWG) | 16 |
| Degree of protection | IP68 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 12 A |
| Rated voltage | 630 V |
| Rated impulse voltage | 6000 V |
| Pollution degree | 3 |
| Overvoltage category | III |
| Insulating material group | II |
| Volume resistivity | ≤ 5 mΩ |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | PA |
| Housing material | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 18.214 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- The end user must take suitable safety measures to ensure that the connector cannot be disconnected accidentally.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?