Ordering no:
Female panel mount connector with single wires 0.25 mm²
Female panel mount connector with single wires 0.25 mm², Series 825/876 D-coding
Available numbers of contacts
Variants for number of contacts 4
76 0136 0011 00404-0200
M12-D female panel mount connector, Contacts: 4, not shielded, single wires, IP67, UL, PG9
M18, series 876, Automation technology - sensors and actuators
| Order number |
76 0136 0011 00404-0200
|
| Old order number | 09 3732 00 04 |
| Connector locking system | bolted |
| Termination | single wires |
| Wire gauge (mm) | (0,25 mm²) |
| Wire gauge (AWG) | 24 |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | >10¹⁰Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | PA |
| Approval 1 | UL |
| Customs tariff number | 85369010 |
| Weight (g) | 12.393 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
76 0236 0011 00404-0200
M12-D female panel mount connector, Contacts: 4, not shielded, single wires, IP67, UL, M16x1,5
M18, series 876, Automation technology - sensors and actuators
| Order number |
76 0236 0011 00404-0200
|
| Old order number | 09 3732 700 04 |
| Connector locking system | bolted |
| Termination | single wires |
| Wire gauge (mm) | (0,25 mm²) |
| Wire gauge (AWG) | 24 |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | >10¹⁰Ω |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | PA |
| Approval 1 | UL |
| Customs tariff number | 85369010 |
| Weight (g) | 12.17 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?