Ordering no:
Male panel mount connector SMT, with housing, shiedable
Male panel mount connector SMT, with housing, shiedable, Series 715/766
Available numbers of contacts
99 4431 401 04
M12-B integrated plug, Contacts: 4, shieldable, reflow soldering, IP67
M18, series 766, Automation technology - sensors and actuators
| Order number |
99 4431 401 04
|
| Connector locking system | bolted |
| Termination | reflow soldering |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | >10⁸Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | LCP |
| Voltage | 250 V DC |
| Customs tariff number | 85369010 |
| Weight (g) | 9.274 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
99 4441 401 05
M12-B integrated plug, Contacts: 5, shieldable, reflow soldering, IP67
M18, series 766, Automation technology - sensors and actuators
| Order number |
99 4441 401 05
|
| Connector locking system | bolted |
| Termination | reflow soldering |
| Degree of protection | IP67 |
| Mechanical operation | > 100 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -40 °C |
| Rated current (40 °C) | 4 A |
| Rated voltage | 60 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | >10⁸Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | LCP |
| Voltage | 250 V DC |
| Customs tariff number | 85369010 |
| Weight (g) | 9.421 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?